Virtual; Serverfarm (Virtual Server) - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Load Sharing Network Address Translation (LSNAT)

serverfarm (Virtual Server)

Use this command to associate a virtual server with an LSNAT server farm.
Syntax
serverfarm serverfarm-name
no serverfarm serverfarm-name
Parameters
serverfarm‐name
Defaults
None.
Mode
Router command, SLB Virtual Server Configuration mode: Matrix>Router(config‐slb‐vserver)#
Usage
The "no" form of this command removes the virtual server association.
Example
This example shows how to associate the virtual server named "virtual‐http" to the "httpserver"
server farm:
Matrix>Router(config)#ip slb serverfarm httpserver
Matrix>Router(config-slb-sfarm)#real 10.1.2.1 port 80
Matrix>Router(config-slb-real)#inservice
Matrix>Router(config-slb-real)#exit
Matrix>Router(config-slb-sfarm)#real 10.1.2.3 port 80
Matrix>Router(config-slb-real)#inservice
Matrix>Router(config-slb-real)#exit
Matrix>Router(config-slb-sfarm)#exit
Matrix>Router(config)#ip slb vserver virtual-http
Matrix>Router(config-slb-vserver)#serverfarm httpserver

virtual

Use this command to configure a virtual server IP address.
Syntax
virtual ip-address {tcp | udp} port [service service-name]
no virtual ip-address
19-22 LSNAT Configuration
Specifies a server farm name. Must be previously configured with the
ip slb serverfarm command as described in "ip slb serverfarm" on
page 19‐8.
serverfarm (Virtual Server)