Show Cos Violation Irl; Clear Cos Violation Irl - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Policy Class of Service (CoS)
tos‐value
txq‐reference
irl‐reference
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear the priority and transmit queue reference values for CoS entry 2:
Matrix(rw)->clear cos settings 2 priority txq-reference

show cos violation irl

Use this command to display Class of Service violation configurations.
Syntax
show cos violation irl
Parameters
violation‐index
Defaults
If no options are specified, all inbound rate limiting violation information will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to show any CoS inbound rate limiting violations:
Matrix(rw)->show cos violation irl
There are no ports disabled by any irl rate limiters

clear cos violation irl

Use this command to clear Class of Service inbound rate limiting violation configurations.
Syntax
clear cos violation irl {all | disabled-ports | violation-index} {both | status |
counter}
8-40 Policy Classification Configuration
Clears the Type of Service value associated with this entry.
Clears the transmit queue reference associated with this entry.
Clears the inbound rate limiting reference associated with this entry.
[violation-index]
(Optional) Displays information for a specific violation index. Valid
entries are in the form of
port-list irl-lis
: t, or *.*.*:* for all entries.
show cos violation irl