Enterasys Matrix DFE-Gold Series Configuration Manual page 493

ping
Mode
Switch command, Read‐Write.
Examples
Matrix(rw)‐>ping 134.141.89.29This example shows how to ping IP address 134.141.89.29. In this
case, this host is alive:
134.141.89.29 is alive
Matrix(rw)‐>ping 134.141.89.255In this example, the host at IP address is not responding:
no answer from 134.141.89.255
This example shows how to ping IP address 134.141.89.29 with 10 packets:
Matrix(rw)->ping 134.141.89.29 10
PING 134.141.89.29: 56 data bytes
64 bytes from 134.141.89.29: icmp-seq=0. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=1. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=2. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=3. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=4. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=5. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=6. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=7. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=8. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=9. time=0. ms ----134.141.89.29 PING
Statistics---- 10 packets transmitted, 10 packets received, 0% packet loss round-
trip (ms)
This example shows a continuous ping of IP address 134.141.89.29. In this case, entering Ctrl+C
after 9 iterations caused command execution to stop:
Matrix(rw)->ping -s 134.141.89.29
PING 134.141.89.29: 56 data bytes
64 bytes from 134.141.89.29: icmp-seq=0. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=1. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=2. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=3. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=4. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=5. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=6. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=7. time=0. ms
64 bytes from 134.141.89.29: icmp-seq=8. time=0. ms ----134.141.89.29 PING
Statistics---- 9 packets transmitted, 9 packets received, 0% packet loss round-
trip (ms)
min/avg/max = 0/0/0
min/avg/max = 0/0/0
Monitoring Network Events and Status
Enterasys Matrix DFE-Gold Series Configuration Guide 11-5