Set Flowlimit Port - Enterasys Matrix DFE-Gold Series Configuration Manual

set flowlimit port

Example
This example shows how to show flow limits and associated actions configured for the various
port classifications:
Matrix(rw)->show flowlimit class
Flow setup throttling class configuration:
Class
------------------ ---------------------- ---------------------------
userPort
serverPort
aggregatedUserPort limit1
interSwitchLink
unspecified
set flowlimit port
Use this command to enable or disable flow limiting on one or more port(s), assign a flow limiting
user classification to one or more port(s) or enable an interface previously disabled by a flow
limiting action.
Syntax
set flowlimit port {enable | disable} | class {userport | serverport | aggregateduser |
interswitchlink | unspecified} | status {operational} [port‐string]
Parameters
enable | disable
class userport |
serverport |
aggregateduser |
interswitchlink |
unspecified
status operational
port‐string
Limit
limit1 :800
limit2 :1000
limit1 :5000
limit2 :6000
:5000
limit2 :6000
limit1 :14000
limit2 :16000
limit1 :0
limit2 :0
Enables or disables flow limiting on specified ports.
Assigns a user classification type to the port(s) as:
• user port
• server port
• aggregation port
• interswitch link
• unspecified port
Enables an interface previously disabled by a flow limiting action.
(Optional) Specifies port(s) on which to configure flow limiting
parameters.
Configuring Flow Setup Throttling (FST)
Action
action1 :notify
action2 :disable,notify
action1 :notify
action2 :disable,notify
action1 :notify
action2 :disable,notify
action1 :notify
action2 :disable,notify
action1 :notify
action2 :disable,notify
Enterasys Matrix DFE-Gold Series Configuration Guide 24-31