Show System Password - Enterasys Matrix DFE-Gold Series Configuration Manual

show system password

The admin password can be reset by toggling dip switch 8 on the device as described in your
Matrix Series Installation Guide.
Examples
This example shows how a super‐user would change the Read‐Write password from the system
default (blank string):
Matrix(su)->set password rw
Please enter new password: ********
Please re-enter new password: ********
Password changed.
Matrix(su)->
This example shows how a user with Read‐Write access would change his password:
Matrix(rw)->set password
Please enter old password: ********
Please enter new password: ********
Please re-enter new password: ********
Password changed.
Matrix(rw)->
show system password
Use this command to display current password configuration settings.
Syntax
show system password
Parameters
None.
Defaults
None.
Mode
Switch command, Super User.
Example
This example shows how to display password configuration settings. In this case, the settings
displayed are the default settings:
Matrix(su)->show system password
Password history size
Password aging
Password minimum length: 8
Password minimum character requirements:
Uppercase: 0
Lowercase: 0
: 0
: disabled
Enterasys Matrix DFE-Gold Series Configuration Guide 2-19
Setting User Accounts and Passwords