Clear Macauthentication Reauthperiod - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring MAC Authentication
Parameters
time
port‐string
Defaults
None.
Mode
Switch command, Read‐Write.
Usage
This is the time lapse between attempts to reauthenticate any current MAC address authenticated
to a port.
Example
This example shows how to set the MAC reauthentication period to 7200 seconds
(2 hours) on ge.2.1 through 5:
Matrix(rw)->set macauthentication reauthperiod 7200 ge.2.1-5

clear macauthentication reauthperiod

Use this command to clear the MAC reauthentication period on one or more ports.
Syntax
clear macauthentication reauthperiod [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, the reauthentication period will be cleared on all ports.
Mode
Switch command, Read‐Write.
Example
This example shows how to globally clear the MAC reauthentication period:
Matrix(rw)->clear macauthentication reauthperiod
25-36 Authentication Configuration
Specifies the number of seconds between reauthentication attempts.
Valid values are 1 ‐ 4294967295.
Specifies the port(s) on which to set the MAC reauthentication period.
For a detailed description of possible port‐string values, refer to "Port
String Syntax Used in the CLI" on page 4‐2.
(Optional) Clears the MAC reauthentication period on specific port(s).
For a detailed description of possible port‐string values, refer to "Port
String Syntax Used in the CLI" on page 4‐2.
clear macauthentication reauthperiod