Enterasys Matrix DFE-Gold Series Configuration Manual page 605

traceroute
Parameters
host
Defaults
None.
Mode
Router command, Privileged EXEC: Matrix>Router#
Usage
Three ICMP probes will be transmitted for each hop between the source and the traceroute
destination.
Examples
This example shows how to use traceroute to display a round trip path to host 192.167.252.46. In
this case, hop 1 is an unnamed router at 192.167.201.2, hop 2 is "rtr10" at 192.4.9.10, hop 3 is
"rtr43" at 192.167.208.43, and hop 4 is back to the host IP address. Round trip times for each of the
three ICMP probes are displayed before each hop. Probe time outs are indicated by an asterisk (*):
Matrix>Router#traceroute 192.167.225.46
Traceroute to 192.167.225.46, 30 hops max, 40 byte packets
1 10.00 ms
2 20.00 ms
3 240.00 ms
4 <1 ms
TraceRoute Complete
Specifies a host to which the route of an IP packet will be traced.
20.00 ms 20.00 ms
20.00 ms 20.00 ms
* 480.00 ms
* 20.00 ms
Reviewing IP Traffic and Configuring Routes
192.167.201.2 []
192.4.9.10 [enatel-rtr10.enatel.com]
192.167.208.43 [enatel-rtr43.enatel.com]
192.167.225.46 [enatel-rtr46.enatel.com]
Enterasys Matrix DFE-Gold Series Configuration Guide 16-29