Ip Ospf Priority - Enterasys Matrix DFE-Gold Series Configuration Manual

ip ospf priority

Mode
Router command, Interface configuration: Matrix>Router(config‐if(Vlan 1))#
Usage
Each router interface that participates in OSPF routing is assigned a default cost. This command
overwrites the default of 10.
The "no" form of this command resets the OSPF cost to the default of 10.
Example
This example shows how to set the OSPF cost to 20 for VLAN 1:
Matrix>Router(config)#interface vlan 1
Matrix>Router(config-if(Vlan 1))#ip ospf cost 20
ip ospf priority
Use this command to set the OSPF priority value for router interfaces.
Syntax
ip ospf priority number
no ip ospf priority
Parameters
number
Defaults
None.
Mode
Router command, Interface configuration: Matrix>Router(config‐if(Vlan 1))#
Usage
The priority value is communicated between routers by means of hello messages and influences
the election of a designated router.
The "no" form of this command resets the value to the default of 1.
Example
This example shows how to set the OSPF priority to 20 for VLAN 1:
Matrix>Router(config)#interface vlan 1
Matrix>Router(config-if(Vlan 1))#ip ospf priority 20
Specifies the router's OSPF priority in a range from 0 to 255.
Enterasys Matrix DFE-Gold Series Configuration Guide 21-25
Configuring OSPF