Graceful-Restart Strict-Lsa-Checking-Disable - Enterasys Matrix DFE-Gold Series Configuration Manual

graceful-restart strict-lsa-checking-disable

Parameters
interval
Defaults
None.
Mode
Router command, Router configuration: Matrix‐>Router(config‐router)#
Usage
The restart inteval sets the maximum amount of time that this router will remain in graceful
restart once an OSPF restart is initiated.
The "no" form of this command resets the graceful‐restart restart‐interval to its default value.
Example
This example sets the graceful restart restart‐interval to 300 seconds:
Matrix->Router(config)#router ospf 1
Matrix->Router(config-router)#graceful-restart enable
Matrix->Router(config-router)#graceful-restart restart-interval 300
graceful-restart strict-lsa-checking-disable
Use this command to disable strict LSA checking during graceful restart.
Syntax
graceful-restart strict-lsa-checking-disable
no graceful-restart strict-lsa-checking-disable
Parameters
None.
Defaults
Strict LSA checking enabled.
Mode
Router command, Router configuration: Matrix‐>Router(config‐router)#
Usage
Strict LSA checking assures that graceful restart will terminate if there is a changed LSA on the
restarting router's retransmission list when graceful restart intitiates or an LSA change occurs
during graceful restart. With strict LSA checking disabled, graceful restart does not terminate for
these conditions.
The "no" form of this command enables strict LSA checking.
Specifies the maximum amount of time in seconds that this router will
remain in graceful‐restart mode starting at the time it enters graceful‐
restart. Valid values are 1 ‐ 1800 seconds. Default value is 120 seconds.
Enterasys Matrix DFE-Gold Series Configuration Guide 21-41
Configuring OSPF