Clear Mtu - Enterasys Matrix DFE-Gold Series Configuration Manual

set mtu
set mtu
Use this command to disable or re‐enable path MTU discovery protocol on the device.
Syntax
set mtu {enable | disable}
Parameters
enable | disable
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to disable path MTU discovery:
Matrix(rw)->set mtu disable

clear mtu

Use this command to reset the state of the path MTU discovery protocol back to enabled.
Syntax
clear mtu
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to reset the state of MTU discovery:
Matrix(rw)->clear mtu
Enables or disables path MTU discovery protocol.
Enterasys Matrix DFE-Gold Series Configuration Guide 2-91
Enabling or Disabling the Path MTU Discovery Protocol