Clear Router Limits (Twcb) - Enterasys Matrix DFE-Gold Series Configuration Manual

clear router limits (TWCB)

Mode
Switch command mode: Matrix(rw)‐>.
Examples
This example displays all router limits for this system:
Matrix(su)->show router limits
LSNAT maximum Bindings
LSNAT Cache size
LSNAT maximum Configs
NAT maximum Bindings
NAT Cache size
NAT maximum dynamic mapping Configs
NAT maximum static mapping Configs
NAT maximum Interface Configs
NAT maximum global address Configs
NAT maximum global port Configs
Route Table Limit
TWCB maximum Bindings
TWCB Cache size
TWCB maximum Configs
This example displays the TWCB cache‐size limit for this system:
Matrix(su)->show router limits twcb-cache
TWCB Cache size
clear router limits (TWCB)
Use this command to reset TWCB router limits to the default values.
Syntax
clear router limits [twcb-binding] [twcb-cache] [twcb-configs]
Parameters
twcb‐binding
twcb‐cache
twcb‐configs
Defaults
If no parameters are specified, all router limits are reset, including NAT and LSNAT router limits.
Mode
Switch Command: Matrix(rw)‐>.
(Optional) Specifies the resetting of TWCB binding router limits to the
default value.
(Optional) Specifies the resetting of TWCB cache size router limits to the
default value.
(Optional) Specifies the resetting the number of TWCB configurations to
the default value.
Enterasys Matrix DFE-Gold Series Configuration Guide 23-17
Understanding Transparent Web Cache Balancing (TWCB)
- 32000 (default)
- 2000 (default)
- 50 (default)
- 32000 (default)
- 2000 (default)
- 10 (default)
- 50 (default)
- 103 (default)
- 1000 (default)
- 32000 (default)
- 12000 (default)
- 32000 (default)
- 2000 (default)
- 1 (default)
- 2000 (default)