Commands; Purpose; Reviewing Port Status; Show Port - Enterasys Matrix DFE-Gold Series Configuration Manual

show port

Reviewing Port Status

Purpose

To display operating status, duplex mode, speed, port type, and statistical information about
traffic received and transmitted through one or all switch ports on the device.

Commands

The commands used to review port status are listed below and described in the associated
sections as shown.
For information about...
show port
show port status
show port counters
show port operstatuscause
clear port operstatuscause
show port
Use this command to display whether or not one or more ports are enabled for switching.
Syntax
show port [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, operational status information for all ports will be displayed.
Mode
Switch command, Read‐Only.
Examples
This example shows how to display operational status information for 1‐Gigabit Ethernet port 14
in module 3:
Matrix(rw)->show port ge.3.14
Port ge.3.14 enabled
(Optional) Displays operational status for specific port(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 4‐2.
Enterasys Matrix DFE-Gold Series Configuration Guide 4-13
Reviewing Port Status
Refer to page...
4-13
4-14
4-15
4-17
4-18