Commands; Show Dot1X - Enterasys Matrix DFE-Gold Series Configuration Manual

show dot1x

selected ports, which results in allowing or denying network access according to RADIUS server
configuration.

Commands

For information about...
show dot1x
show dot1x auth-config
set dot1x
set dot1x auth-config
clear dot1x auth-config
show dot1x
Use this command to display 802.1X status, diagnostics, statistics, and reauthentication or
initialization control information for one or more ports.
Syntax
show dot1x [auth-config | access-entity | auth-diag | auth-session-stats auth-
stats [all] [port-string] [index index-list] | [mac [all] mac [port-string] [index
index-list] | [port [init | reauth]] [port-string]]
Parameters
auth‐config
access‐entity
auth‐diag
auth‐session‐stats
auth‐stats
all
mac all mac
index index‐list
port init | reauth
port‐string
Defaults
• If no parameters are specified, 802.1X status will be displayed.
• If all is not specified, only active entries will be displayed.
• If index is not specified, information for all access entities will be displayed.
• If port‐string is not specified, information for all ports will be displayed.
(Optional) Displays authentication configuration information.
(Optional) Displays access entity information.
(Optional) Displays authentication diagnostics information.
(Optional) Displays authentication session statistics.
(Optional) Displays authentication statistics.
(Optional) Displays inactive and active authentication entries.
Displays information for one or all MAC addresses.
(Optional) Displays information for one or more access entities. Valid
values are 0 ‐ 8191.
(Optional) Displays the status of port initialization and reauthentication
control.
(Optional) Displays information for specific port(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 4‐2.
Enterasys Matrix DFE-Gold Series Configuration Guide 25-3
Configuring 802.1X Authentication
Refer to page...
25-3
25-5
25-7
25-7
25-9