Show Tacacs Command - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring TACACS+
Defaults
At least one of the session authorization parameters must be specified.
Mode
Switch command, Read‐Write.
Examples
This example shows how to return only the service name to the default of "exec."
Matrix(rw)->clear tacacs session authorization service
This example shows how to return all the session authorization parameters to their default values.
Matrix(rw)->clear tacacs session authorization service read-only read-write
super-user

show tacacs command

Use this command to display the status (enabled or disabled) of TACACS+ accounting or
authorization on a per‐command basis.
Syntax
show tacacs command {accounting | authorization} [state]
Parameters
accounting
authorization
state
Defaults
If state is not specified, all accounting or authorization configuration parameters are displayed
(which at this time includes only the enabled/disabled status).
Mode
Switch command, Read‐Write.
Example
This example shows how to display the state of the TACACS+ client's command authorization.
Matrix(rw)->show tacacs command authorization
TACACS+ command authorization state:
25-70 Authentication Configuration
Display the status of TACACS+ accounting on a per‐command basis.
Display the status of TACACS+ authorization on a per‐command basis.
(Optional) Specifies that only the status should be displayed.
enabled
show tacacs command