Clear Rmon Host; Show Rmon Topn - Enterasys Matrix DFE-Gold Series Configuration Manual

clear rmon host

Example
This example shows how to enable RMON host entry 1:
Matrix(rw)->set rmon host status 1 enable
clear rmon host
Use this command to delete an RMON host entry.
Syntax
clear rmon host index
Parameters
index
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear RMON host entry 1:
Matrix(rw)->clear rmon host 1

show rmon topN

Use this command to displays RMON TopN properties and statistics. TopN monitoring prepares
tables that describe the hosts topping a list ordered by one of their statistics. TopN lists are
samples of one of the hosts base statistics over a specific interval.
Syntax
set rmon topN [index]
Parameters
index
Defaults
If index is not specified, information about all entries will be displayed.
Mode
Switch command, Read‐Only.
Specifies the index number of the entry to be cleared.
(Optional) Displays RMON properties and statistics for a specific entry
index ID.
Enterasys Matrix DFE-Gold Series Configuration Guide 11-29
Configuring RMON