Clear Console Baud; Show Console Flowcontrol - Enterasys Matrix DFE-Gold Series Configuration Manual

Setting Console Port Properties
Parameters
rate
port‐string
Defaults
If port‐string is not specified, baud rate will be set for all console ports.
Mode
Switch command, Read‐Write.
Example
This example shows how to set the baud rate to 19200 on console port com.1.1:
Matrix(rw)->set console baud 19200 com.1.1

clear console baud

Use this command to clear the baud rate for one or more console ports.
Syntax
clear console baud [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, baud rate will be cleared for all console ports.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear the baud rate on console port com.1.1:
Matrix(rw)->clear console baud com.1.1

show console flowcontrol

Use this command to display the type of flow control setting for one or more console ports.
Syntax
show console flowcontrol [port-string]
Parameters
port‐string
4-6 Port Configuration
Sets the console baud rate. Valid values are: 300, 600, 1200, 2400, 4800,
5760, 9600, 14400, 19200, 38400, and 115200.
(Optional) Sets baud rate for specific port(s).
(Optional) Clears baud rate for specific port(s).
(Optional) Displays the flow control setting for specific console port(s).
clear console baud