Show Port Lacp - Enterasys Matrix DFE-Gold Series Configuration Manual

show port lacp

show port lacp
Use this command to display link aggregation information for one or more underlying physical
ports.
Syntax
show port lacp port port-string {[status {detail | summary}] | [counters]} [sort
{port | lag}]
Parameters
port port‐string
status detail |
summary
counters
sort port | lag
Defaults
None.
Mode
Switch command, Read‐Only.
Examples
This example shows how to display detailed LACP status information for port fe.1.12:
Matrix(rw)-> show port lacp port fe.1.12 status detail
Port Instance:
ActorPort:
ActorSystemPriority:
ActorPortPriority:
ActorAdminKey:
ActorOperKey:
ActorAdminState:
ActorOperState:
ActorSystemID:
SelectedAggID:
AttachedAggID:
MuxState:
DebugRxState:
This example shows how to display summarized LACP status information for port fe.1.12:
Displays LACP information for specific port(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 4‐2.
Displays LACP status in detailed or summary information.
Displays LACP counter information.
(Optional) When summary is specified, sorts display by port
designation or LAG ID.
00-e0-63-9d-b5-87
port Disabled
Note: State definitions, such as ActorAdminState and Partner AdminState, are indicated with letter
abbreviations. If the show port lacp command displays one or more of the following letters, it
means the state is true for the associated actor or partner ports:
E = Expired; F = Defaulted; D = Distributing (tx enabled); C = Collecting (rx enabled);
S = Synchronized (actor and partner agree); G = Aggregation allowed; S/l = Short/Long LACP
timeout; A/p = Active/Passive LACP.
For more information about these states, refer to set port lacp
the IEEE 802.3 2002 specification.
fe.1.12
1411 PartnerAdminPort:
32768 PartnerOperPort:
32768 PartnerAdminSystemPriority:
32768 PartnerOperSystemPriority:
32768 PartnerAdminPortPriority:
-----GlA PartnerOperPortPriority:
-F----lA PartnerAdminKey:
PartnerOperKey:
none PartnerAdminState:
none PartnerOperState:
Detached PartnerAdminSystemID:
PartnerOperSystemID:
Enterasys Matrix DFE-Gold Series Configuration Guide 4-65
Configuring LACP
32768
32768
32768
32768
--DCSGlp
--DC-Glp
00-00-00-00-00-00
00-00-00-00-00-00
("set port lacp" on page 4-66) and
1411
1411
1411
1411