Show Cos Reference - Enterasys Matrix DFE-Gold Series Configuration Manual

show cos reference

Mode
Switch command, Read‐Write.
Example
This example shows how to clear all port resource settings associated with Class of Service
transmit queue 1 in port group 0.1:
Matrix(rw)->clear cos port-resource txq 0.1 1
show cos reference
Use this command to display Class of Service port reference information.
Syntax
show cos reference [txq | irl group-type-index [reference]]
Parameters
irl | txq
group‐type‐index
reference
Defaults
If no options are specified, all reference information for all port types will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to show all transmit queue reference configuration information for port
group 0.1:
Matrix(rw)->show cos reference txq 0.1
Group Index Reference Type
----------- --------- ---- ------------
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
(Optional) Displays inbound rate limiting or transmit queue reference
information.
(Optional) Displays information for a specific port group/type entry.
(Optional) Displays information for a specific reference entry.
Queue
0 txq 0
1 txq 0
2 txq 0
3 txq 0
4 txq 1
5 txq 1
6 txq 1
7 txq 1
8 txq 2
9 txq 2
10 txq 2
11 txq 2
Configuring Policy Class of Service (CoS)
Enterasys Matrix DFE-Gold Series Configuration Guide 8-35