Weight; Maxconns - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Load Sharing Network Address Translation (LSNAT)

maxconns

Use this command to limit the number of connections to a real LSNAT server.
Syntax
maxconns maximum-number
no maxconns
Parameters
maximum‐number
Defaults
None.
Mode
Router command, SLB Real Server Configuration mode: Matrix>Router(config‐slb‐real)#
Usage
The "no" form of this command removes the limit of connections to the server.
Example
This example shows how to limit the number of connections to 20 on the real server at IP 10.1.2.3
in the "httpserver" server farm:
Matrix>Router(config)#ip slb serverfarm httpserver
Matrix>Router(config-slb-sfarm)#real 10.1.2.3 port 80
Matrix>Router(config-slb-real)#faildetect ping-int 10 ping-retries 6
Matrix>Router(config-slb-real)#maxconns 20
Matrix>Router(config-slb-real)#inservice

weight

Use this command to specify the weight load number of a real server that is a member of an
LSNAT server farm.
Syntax
weight weight-number
no weight weight-number
Parameters
weight‐number
Defaults
None.
19-18 LSNAT Configuration
Specifies the maximum number of connections allowed. The default
condition is unlimited number of connections.
Specifies the weight load number. Valid values are 1‐255.
maxconns