Clear Cos All-Entries - Enterasys Matrix DFE-Gold Series Configuration Manual

clear cos all-entries

Parameters
all
disabled‐ports
violation-index
|
both
Defaults
If no options are specified, all information for all types of CoS violations will be displayed.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear both status and counters from all CoS inbound rate limiting
violation entries:
Matrix(rw)->clear cos violation irl all both
clear cos all-entries
Use this command to clears all Class of Service entries except priority settings 0 ‐ 7.
Syntax
clear cos all-entries
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear all Class of Service entries except priority settings 0 ‐ 7:
Matrix(rw)->clear cos all-entries
Clears all inbound rate limiting violation entries.
Clears the list of ports that are disabled because of violating an inbound
rate limiter.
Clears the entry for a specific violation index.
|
status counter Clears the violation status, the violation counter, or both.
Configuring Policy Class of Service (CoS)
Enterasys Matrix DFE-Gold Series Configuration Guide 8-41