Enterasys Matrix DFE-Gold Series Configuration Manual page 774

Configuring Port Priority
Parameters
port‐string
Defaults
None.
Mode
Switch command, Read‐Write.
Usage
This command will cause all frames received without a priority value in its header to be set to
priority 0.
Example
This example shows how to reset fe.1.11 to the default priority:
Matrix(rw)->clear port priority fe.1.11
22-4 Port Priority and Rate Limiting Configuration
Specifies the port for which to clear priority. For a detailed description
of possible port‐string values, refer to "Port String Syntax Used in the
CLI" on page 4‐2.
clear port priority