Clear Port Discard - Enterasys Matrix DFE-Gold Series Configuration Manual

Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
Mode
Switch command, Read‐Write.
Example
This example shows how to set Fast Ethernet port 7 in module2 to discard both tagged and
untagged frames:
Matrix(rw)->set port discard fe.2.7 both

clear port discard

Use this command to reset the frame discard mode to the factory default setting (none).
Syntax
clear port discard port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to reset Fast Ethernet port 7 in module module2 to the default discard
mode of "none":
Matrix(rw)->clear port discard fe.2.7
7-16 802.1Q VLAN Configuration
Specifies the port(s) for which to reset frame discard mode. For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐2.
clear port discard