show cos port-resource
Mode
Switch command, Read‐Write.
Example
This example shows how to clear all non‐default CoS transmit queue port group entries:
Matrix(rw)->clear cos port-config txq all
show cos port-resource
Use this command to display Class of Service port resource configuration information.
Syntax
show cos port-resource irl group-type-index [resource] [violators]
Parameters
irl | txq
group‐type‐index
resource
violators
Defaults
If no options are specified, all rate limiting information for all port types will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to show all inbound rate limiting port resource configuration
information for port group 0.1:
Matrix(rw)->show cos port-resource irl 0.1
'?' after the rate value indicates an invalid rate value
Group Index Resource Type Unit
----------- -------- ---- ---- ----------
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
(Optional) Displays inbound rate limiting or transmit queue
information.
(Optional) Displays information for a specific port group/type entry.
(Optional) Displays rate limiters or transmit queues associated with this
entry.
(Optional) Displays ports that have violated inbound rate limiters.
0
irl
perc none
1
irl
perc none
2
irl
perc none
3
irl
perc none
4
irl
perc none
5
irl
perc none
6
irl
perc none
7
irl
perc none
Configuring Policy Class of Service (CoS)
Rate
Rate Limit Type Action
--------------- -----
drop
drop
drop
drop
drop
drop
drop
drop
Enterasys Matrix DFE-Gold Series Configuration Guide 8-31
none
none
none
none
none
none
none
none