Commands; Purpose; Configuring Node Aliases - Enterasys Matrix DFE-Gold Series Configuration Manual

This chapter describes node alias commands and how to use them.

Configuring Node Aliases

Purpose

To review, configure, disable and re‐enable node (port) alias functionality, which determines what
network protocols are running on one or more ports.

Commands

For information about...
show nodealias
show nodealias mac
show nodealias protocol
show nodealias config
set nodealias
set nodealias maxentries
clear nodealias
clear nodealias config
show nodealias
Use this command to display node alias properties for one or more ports.
Syntax
show nodealias [port-string]
Parameters
port‐string
Node Alias Configuration
(Optional) Displays node alias properties for specific port(s). For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐2.
Enterasys Matrix DFE-Gold Series Configuration Guide 14-1
14
Refer to page...
14-1
14-2
14-4
14-5
14-6
14-7
14-7
14-8