Show Multiauth Station; Clear Multiauth Station - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Multiple Authentication

show multiauth station

Use this command to display multiple authentication station (end user) entries.
Syntax
show multiauth station [mac address] [port port-string]
Parameters
mac address
port port‐string
Defaults
If no options are specified, multiple authentication station entries will be displayed for all MAC
addresses and ports.
Mode
Switch command, Read‐Only.
Example
This example shows how to display multiple authentication station entries. In this case, two end
user MAC addresses are shown:
Matrix(rw)->show multiauth station
Port
------------ ------------ ------------------------
fe.1.20 mac
fe.2.16 mac

clear multiauth station

Use this command to clear one or more multiple authentication station entries.
Syntax
clear multiauth station [mac address] port port-string
Parameters
mac address
port port‐string
Defaults
If not specified, multiple authentication station entries will be cleared for all MAC addresses.
27-8 MultiAuth Configuration
(Optional) Displays multiple authentication station entries for specific
MAC address(es).
(Optional) Displays multiple authentication station entries for specific
port(s).
Address type Address
00-10-a4-9e-24-87
00-b0-d0-e5-0c-d0
(Optional) Clears multiple authentication station entries for specific
MAC address(es).
Specifies the port(s) for which to clear multiple authentication station
entries.
show multiauth station