Clear Bridge Address - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

clear bridge address

clear bridge { bridgeGroupName | vplsName } address macAddress
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
vplsName variable added in JUNOSe Release 7.1.0.
Removes a specific dynamic (learned) MAC address entry from the forwarding table
Description
for the specified bridge group or VPLS instance. There is no no version.
Options
Privileged Exec
Mode
Related Topics
bridgeGroupName Name of a bridge group specified with the bridge command
vplsName Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
macAddress Unique 48-bit (6-byte) number that is programmed into each LAN
network interface card (NIC) at the time of manufacture; also known as a
hardware address or physical address. The MAC address format is a dotted triple
of four-digit hexadecimal numbers; for example, 0090.1a40.4c7c
Clearing Dynamic MAC Addresses from the VPLS Forwarding Table in the JUNOSe
BGP and MPLS Configuration Guide
Chapter 4: C Commands
373
clear bridge address