Clear Ip Bgp Wait-End-Of-Rib - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

clear ip bgp wait-end-of-rib

clear ip bgp [ ipAddress | ipv6Address | peer-group peerGroupName
Syntax
| * ] [ vrf vrfName ]
[ ipv4 unicast | ipv4 multicast | vpnv4 unicast | l2vpn all | l2vpn vpls vplsName |
l2vpn vpws vpwsName | route-target signaling ] wait-end-of-rib
Command introduced before JUNOSe Release 7.1.0.
Release Information
l2vpn keyword added in JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.
route-target signaling keywords added in JUNOSe Release 8.2.0.
all, vpls, and vpws keywords and vplsName and vpwsName variables added in JUNOSe
Release 9.3.0.
Brings down the underlying TCP connection and then brings it back up again, causing
Description
both peers to resend their complete BGP routing table, but clears the specified peer
from the set of peers for which BGP is waiting to receive an End-of-RIB marker after
a peer restart. Hard clearing a peer has the same effect for that peer. There is no no
version.
Options
Privileged Exec
Mode
Related Topics
384
clear ip bgp wait-end-of-rib
ipAddress IP address of identified BGP neighbor to clear
ipv6Address IPv6 address of identified BGP neighbor to clear
peerGroupName Name of a BGP peer group to clear
* Clears all connections
vrfName Name of a virtual routing and forwarding instance to clear
ipv4 unicast Clears the IPv4 unicast routing table; the default option
ipv4 multicast—Clears the IPv4 multicast routing table
vpnv4 unicast—Clears the VPNv4 unicast routing and forwarding table
l2vpn all Clears the L2VPN reachability information for all VPLS and VPWS
instances in the L2VPN address family
l2vpn vpls vplsName Clears the L2VPN reachability information for the VPLS
instance with the name vplsName
l2vpn vpws vpwsName Clears the L2VPN reachability information for the VPWS
instance with the name vpwsName
route-target signaling Clears the route-target membership information
Clearing BGP Attributes for L2VPNs and Clearing BGP Attributes for VPLS in the
JUNOSe BGP and MPLS Configuration Guide