Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual page 423

Chapter 4: C Commands
rtfAddress rtfPrefix with a prefix length of 96; representing the route-target
membership NLRI (RT-MEM-NLRI), in the format asNumber: extendedCommunity
(for example, 320:320:524 or 320:50.2.3.4:524)
vrfName Name of a virtual routing and forwarding instance to clear
ipv4 unicast Clears the IPv4 unicast routing table; the default option
ipv4 multicast—Clears the IPv4 multicast routing table
vpnv4 unicast—Clears the VPNv4 unicast routing and forwarding table
l2vpn all Clears the L2VPN reachability information for all VPLS and VPWS
instances in the L2VPN address family
l2vpn vpls vplsName Clears the L2VPN reachability information for the VPLS
instance with the name vplsName
l2vpn vpws vpwsName Clears the L2VPN reachability information for the VPWS
instance with the name vpwsName
ipAddress IP address of the BGP neighbor to clear
addressMask Address mask to be applied to the network IP address
Privileged Exec
Mode
Clearing BGP Attributes for L2VPNs and Clearing BGP Attributes for VPLS in the
Related Topics
JUNOSe BGP and MPLS Configuration Guide
381
clear ip bgp dampening