Ip Mirror - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip mirror

Syntax
Release Information
Description
Options
Mode
Related
Documentation
848
ip mirror mirrorInterfaceType mirrorInterfaceSpecifier
[ analyzerInterfaceType analyzerInterfaceSpecifier [ next-hop nextHop ] ]
no ip mirror mirrorInterfaceType mirrorInterfaceSpecifier
Command introduced before JunosE Release 7.1.0.
Configures the specified interface to mirror all IP ingress and egress traffic, and directs
the mirrored traffic to an analyzer interface. The no version disables mirroring on the
interface.
NOTE: This command is deprecated and might be removed completely in a
future release. The function provided by this command has been replaced
by the updated packet mirroring feature and the ip policy command used
with the secure-input and secure-output keywords.
mirrorInterfaceType—Interface type; see Interface Types and Specifiers on page 5
mirrorInterfaceSpecifier—Particular interface that performs the interface mirroring
function; see Interface Types and Specifiers on page 5
analyzerInterfaceType—Interface type
analyzerInterfaceSpecifier—Particular interface used as the analyzer interface; if omitted,
the virtual router's default analyzer interface is used
nextHop—Next-hop IP address to the remote analyzer host; required if the analyzer
interface is a shared medium, such as Ethernet
Global Configuration
Configuring CLI-Based Mirroring
Copyright © 2010, Juniper Networks, Inc.