Clear Bridge Interface - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

clear bridge interface

clear bridge interface interfaceType interfaceSpecifier
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Removes from the forwarding table all dynamic (learned) MAC address entries for
Description
a specified network interface that belongs to a bridge group or to a VPLS instance .
There is no no version.
NOTE: Using the clear bridge interface command for a VPLS instance affects the
specified network interface associated with the VPLS instance, but has no effect on
the VPLS virtual core interface, which represents all of the MPLS tunnels from the
router to the remote VPLS edge (VE) devices. To remove all MAC addresses from the
forwarding table for the VPLS virtual core interface, use the clear bridge interface
vpls command.
Options
Privileged Exec
Mode
Related Topics
374
clear bridge interface
interfaceType One of the following interface types listed in "Interface Types
and Specifiers" on page 5
atm
fastEthernet
gigabitEthernet
tenGigabitEthernet
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
Clearing Dynamic MAC Addresses from the VPLS Forwarding Table in the JUNOSe
BGP and MPLS Configuration Guide