Class-Vc - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

class-vc

class-vc vcClassName
Syntax
no class-vc [ vcClassName ]
Command introduced in JUNOSe Release 7.3.0.
Release Information
Assigns a previously configured VC class to an individual ATM data PVC. The class-vc
Description
command is valid only for data PVCs created with the pvc command; it has no effect
for data PVCs created with the atm pvc command, or for control (ILMI or signaling)
PVCs. Issuing this command applies the set of attributes in the specified VC class to
the ATM data PVC. The no version removes the VC class association with the ATM
PVC.
Options
ATM VC Configuration
Mode
360
class-vc
vcClassName Name of the VC class configured with the vc-class atm command