Clear Bridge Interface Vpls - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

clear bridge interface vpls

clear bridge interface vpls vplsName
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Removes from the forwarding table for a VPLS instance all dynamic (learned) MAC
Description
address entries on the VPLS virtual core interface, which represents all of the MPLS
tunnels from the router to the remote VPLS edge (VE) devices. There is no no version.
NOTE: Using the clear bridge interface vpls command affects the VPLS virtual core
interface, but has no effect on the network interfaces associated with the VPLS
instance. To remove all MAC addresses from the forwarding table for a VPLS network
interface, use the clear bridge interface command.
Options
Privileged Exec
Mode
Related Topics
vplsName Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
Clearing Dynamic MAC Addresses from the VPLS Forwarding Table in the JUNOSe
BGP and MPLS Configuration Guide
Chapter 4: C Commands
clear bridge interface vpls
375