Clear Ip Bgp - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

clear ip bgp

clear ip bgp [ ipAddress | ipv6Address | peer-group peerGroupName
Syntax
| * ] [ vrf vrfName ]
[ ipv4 unicast | ipv4 multicast | vpnv4 unicast | l2vpn all | l2vpn vpls vplsName |
l2vpn vpws vpwsName | route-target signaling ] soft [ in [ prefix-filter ] | out ] ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
l2vpn keyword added in JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.
route-target signaling keywords added in JUNOSe Release 8.2.0.
all, vpls, and vpws keywords and vplsName and vpwsName variables added in JUNOSe
Release 9.3.0.
If the soft option is not used, brings down the underlying TCP connection and then
Description
brings it back up again, causing both peers to resend their complete BGP routing
table. If the soft out option is used, the BGP speaker reapplies outbound policy and
resends all routes to the specified peers. If the soft in option is used, the BGP speaker
reapplies inbound policy to the routes received from the specified peers. This is
possible only if soft reconfiguration inbound has been enabled for the peer or the
peer supports the route-refresh capability. There is no no version.
Options
378
clear ip bgp
ipAddress IP address of identified BGP neighbor to clear
ipv6Address IPv6 address of identified BGP neighbor to clear
peerGroupName Name of a BGP peer group to clear
* Clears all connections
vrfName Name of a virtual routing and forwarding instance to clear
ipv4 unicast Clears the IPv4 unicast routing table; the default option
ipv4 multicast—Clears the IPv4 multicast routing table
vpnv4 unicast—Clears the VPNv4 unicast routing and forwarding table
l2vpn all Clears the L2VPN reachability information for all VPLS and VPWS
instances in the L2VPN address family
l2vpn vpls vplsName Clears the L2VPN reachability information for the VPLS
instance with the name vplsName
l2vpn vpws vpwsName Clears the L2VPN reachability information for the VPWS
instance with the name vpwsName
route-target signaling Clears the route-target membership information
soft Specifies soft reconfiguration
in Triggers inbound soft reconfiguration
prefix-filter Pushes out prefix list and Cisco-proprietary prefix list outbound
route filters and triggers inbound soft reconfiguration
out Triggers outbound soft reconfiguration