Table of Contents
Advertisement
JUNOSe 11.1.x Policy Management Configuration Guide
NOTE: This command is deprecated and might be removed completely in a future
release. The function provided by this command has been replaced by the show
secure policy-list command.
To display information about a specific interface or for all interfaces:
Action
host1#show ip mirror interface atm 5/0.1
------------------- ------------------- ---------------------
ATM5/0.1
Table 62 on page 266 lists the show ip mirror interface command output fields.
Meaning
Table 62: show ip mirror interface Output Fields
Related Topics
Monitoring Failure Messages for Secure Policies
Display failure messages and information for secure policies. This command and the
Purpose
output are visible only to authorized users the mirror-enable command must be
enabled before using this command. All normal E Series system log messages are
suppressed for packet mirroring-related policy operations.
To display information for secure policies:
Action
host1#show mirror log
-----------
TUE SEP 15
2009 18:35:43 UTC
Table 63 on page 267 lists the show mirror log command output fields.
Meaning
266
Monitoring Failure Messages for Secure Policies
Interface
Analyzer Port
FastEthernet3/0
Field Name
Interface
Analyzer Port
Analyzer next-hop
show ip mirror interface
Time
Mirror-ID
------------ ---------- ------------ --------------
8976
Analyzer next-hop
192.168.1.1
Field Description
Interface being mirrored
Interface to which the mirrored traffic is sent, and
that then sends the traffic to the analyzer device
IP address of the next hop to the analyzer device;
displayed when the analyzer interface is a shared
medium
Session-ID
User
Error Status
1923
123@abc.com
no secure policies available
Advertisement
Table of Contents
Need help?
Do you have a question about the POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X and is the answer not in the manual?
Questions and answers