Monitoring Failure Messages For Secure Policies; Table 62: Show Ip Mirror Interface Output Fields; Table 63: Show Mirror Log Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

JunosE 11.3.x Policy Management Configuration Guide
Action
Meaning
Related
Documentation

Monitoring Failure Messages for Secure Policies

Purpose
Action
Meaning
260
To display information about a specific interface or for all interfaces:
host1#show ip mirror interface atm 5/0.1
Interface Analyzer Port
------------------- ------------------- ---------------------
ATM5/0.1 FastEthernet3/0
Table 62 on page 260 lists the show ip mirror interface command output fields.

Table 62: show ip mirror interface Output Fields

Field Name
Interface
Analyzer Port
Analyzer next-hop
show ip mirror interface
Display failure messages and information for secure policies. This command and the
output are visible only to authorized users—the mirror-enable command must be enabled
before using this command. All normal E Series system log messages are suppressed
for packet mirroring-related policy operations.
To display information for secure policies:
host1#show mirror log
Time Mirror-ID
----------- ------------ ---------- ------------ --------------
TUE SEP 15 8976
2009 18:35:43 UTC
Table 63 on page 260 lists the show mirror log command output fields.

Table 63: show mirror log Output Fields

Field Name
Time
Mirror-ID
Analyzer next-hop
192.168.1.1
Field Description
Interface being mirrored
Interface to which the mirrored traffic is sent, and that
then sends the traffic to the analyzer device
IP address of the next hop to the analyzer device;
displayed when the analyzer interface is a shared
medium
Session-ID User
1923 123@abc.com
Field Description
Day, date, and time of failure
Unique identifier of the mirrored session
Error Status
no secure policies available
Copyright © 2010, Juniper Networks, Inc.