Classifier-Group - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

classifier-group

classifier-group { * | classifierName } [ precedence precValue ] [ parent-group
Syntax
parentGroupName ] [ external parent-group externalParentGroupName
parameter parameterName ]
no classifier-group { * | classifierName ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
parent-group keyword and parentGroupName variable added in JUNOSe Release 7.2.0.
external parent-group keyword and externalParentGroupName variable added in
JUNOSe Release 8.0.0.
Creates a classifier group for a policy list and assigns precedence to the specific
Description
CLACL in the group. This command accesses Classifier Group Configuration mode,
in which you create policy rule configurations related to the specified CLACL. If a
parent group was not created by the parent-group command, the parent-group
keyword creates a parent group in a rate-limit hierarchy for IP, IPv6, L2TP, and MPLS.
All packets matching the classifier are sent to the parent group for further processing,
except for packets dropped by the classifier using the filter rule. More than one
classifier group can have the same parent group, which enables you to create
hierarchies. The no version removes the classifier group and its rules from the policy
list.
Options
NOTE: Secure policy lists, which are used for packet mirroring operations, do not
support named classifier groups. You must use classifier-group *. Also, secure policy
lists do not support the precedence keyword.
Policy List Configuration
Mode
Related Topics
*—Specifies that the router selects all packets from the interface associated with
the policy list for this classifier group
classifierName Name of a specific CLACL used to classify packets in this policy
list
precValue Precedence value for the CLACL, in the range 0–65535; a value of
100 is assigned if no value is specified
parentGroupName Name of the parent group; if the parent group does not exist,
naming the parent group creates an empty parent group
externalParentGroupName External parent group name
parameterName Parameter name
Creating a Classifier Group for a Policy List
Chapter 4: C Commands
357
classifier-group