Clear Bgp Ipv6 Dampening - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

For e series broadband services routers - command reference a to m
Table of Contents

Advertisement

clear bgp ipv6 dampening

To clear IPv6-specific information for only the route-target address family:
Syntax
clear bgp ipv6 route-target signaling
{ dampening | flap-statistics } [ rtfPrefix | rtfAddress ]
To clear IPv6-specific information for any case other than for the route-target address
family:
clear bgp ipv6 [ vrf vrfName ] [ unicast | multicast | vpnv6 ]
{ dampening | flap-statistics } [ ipv6Prefix ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
route-target signaling keywords and rtMemNlri variable added in JUNOSe Release
8.2.0.
rtMemNlri variable replaced by two variables, rtfAddress and rtfPrefix, in JUNOSe
Release 9.1.0.
Clears IPv6-specific BGP route flap dampening information and reinstates the
Description
suppressed routes. If the ipv6Prefix option is not used, clears the entire IPv6 BGP
routing table. The dampening keyword and the flap-statistics keyword both have
the same effect. There is no no version.
Options
route-target signaling Clears the route-target membership information
rtfPrefix Prefix representing the route-target membership NLRI (RT-MEM-NLRI),
in the format asNumber : extendedCommunity / prefixLength (for example,
320:320:524/36) where:
asNumber AS number for origin of route target information, in the range
1–4294967295
extendedCommunity—Two-part number in the format number1:number2 that
identifies an extended community of VPNs, in the format number1 : number2,
where:
number1 Autonomous system (AS) number, in the range 1–4294967295,
or an IP address
number2 Unique integer, in the range 1–4294967295; 32 bits if number1
is a 16-bit AS number; 16 bits if number1 is an IP address or a 32-bit AS
number
prefixLength Number that specifies the length of the route prefix, in the
range 32–96
rtfAddress rtfPrefix with a prefix length of 96; representing the route-target
membership NLRI (RT-MEM-NLRI), in the format asNumber: extendedCommunity
(for example, 320:320:524 or 320:50.2.3.4:524)
vrfName Name of a virtual routing and forwarding instance to clear
Chapter 4: C Commands
clear bgp ipv6 dampening
367

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1.x

Table of Contents