Virtual Port Configuration; Table 4. Translational Switch Physical Port Status - Enterasys SSIM-H2-02 Installation And User Manual

Status
Display only. Shows the current status of the port.
Value
Down
Going Up
Up

Table 4. Translational Switch Physical Port Status

Address Demand Aging Level
Sets the threshold on the number of entries in the address table on which entries are
aged faster. Possible values are 50, 60, 70, 80, and 90 percent and Disabled.
Default: 90 percent
Trace Mask
Sets a bit mask for which messages are logged in the message log. Used mainly by
Cabletron Systems support for debugging purposes.

Virtual Port Configuration

To configure a virtual port on a TS port, select Virtual Port Configuration on the
Port Configuration menu of the TS port. If the TS port has more than one virtual
port, a list of the corresponding CRFs appears from which the virtual port must be
selected. The following menu options are available:
Enabled
Sets the administrative state of the virtual port to Yes or No.
Default: Yes
SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide
The port is down.
The port is enabled a protocol connection is being auto-
negotiated.
The port is up.
Meaning
29
Configuration