Show Port Status - Enterasys SecureStack C2 C2G170-24 Configuration Manual

show port status

Parameters
port‐string
Defaults
If port‐string is not specified, operational status information for all ports will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display operational status information for ge.3.14:
C2(su)->show port
ge.
Port
show port status
Use this command to display operating and admin status, speed, duplex mode and port type for
one or more ports on the device.
Syntax
show port status [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, status information for all ports will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display status information for ge.3.14:
C2(su)->show port status
Port
------------
ge.
3.14
Table 7‐1 provides an explanation of the command output.
7-4 Port Configuration
(Optional) Displays operational status for specific port(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 7‐2.
ge.
3.14
3.14 enabled
(Optional) Displays status for specific port(s). For a detailed description of
possible port‐string values, refer to "Port String Syntax Used in the CLI" on
page 7‐2.
ge.
Alias
(truncated)
--------------
3.14
Oper Admin
Status Status
------- -------
up up
Speed Duplex Type
-------- ------- -------------
N/A N/A BaseT RJ45