Show Port Status - Enterasys SecureStack C2 Configuration Manual

show port status

Syntax
show port [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, operational status information for all ports will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display operational status information for
C2(su)->show port ge.3.14
Port ge.3.14 enabled
show port status
Use this command to display operating and admin status, speed, duplex mode and port type for
one or more ports on the device.
Syntax
show port status [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, status information for all ports will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display status information for
C2(su)->show port status ge.3.14
Port
------------
ge.3.14
Table 5‐1 provides an explanation of the command output.
5-4 Port Configuration
(Optional) Displays operational status for specific port(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 5‐2.
(Optional) Displays status for specific port(s). For a detailed description of
possible port‐string values, refer to "Port String Syntax Used in the CLI" on
page 5‐2.
Alias Oper
(truncated) Status
-------------- -------
up
ge
.3.14:
ge
Admin Speed Duplex
Status
------- -------- ------- -------------
up N/A N/A
.3.14:
Type
BaseT RJ45