JUNOSe 11.1.x Command Reference Guide A to M
bundled-group-id
[ no ] bundled-group-id bundledGroupID
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Assigns a bundled group identifier when no endpoint discriminator is available for
Description
bundled sessions using an L2TP destination host profile. When multiple tunnel-service
modules are installed in a router that is deployed as an LNS and the tunnel sessions
carry MLPPP, the router can use the bundled group identifier when selecting a
tunnel-service module for bundled sessions. The no version restores the default value,
no assigned bundled group identifier.
NOTE: We recommend that you assign a bundled group identifier for bundled sessions
only when you are certain that endpoint discriminators are unavailable to identify
bundle membership.
Options
L2TP Destination Profile Host Configuration
Mode
346
bundled-group-id
bundledGroupID Identifier for a bundled group in the range 0–4294967295