Broadcast - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

broadcast

broadcast { permit | deny }
Syntax
no broadcast
Command introduced before JUNOSe Release 7.1.0.
Release Information
Modifies the subscriber policy for the broadcast protocol to define whether the
Description
subscriber (client) interfaces that belongs to a bridge group or to a VPLS instance
forward (permit) or filter (deny) broadcast packets. The no version restores the default
value, deny broadcast packets.
You cannot change the default subscriber policy values for trunk (server) interfaces
that belongs to a bridge group or to a VPLS interface. You also cannot change the
default subscriber policy values for a VPLS virtual core interface, which acts as a
trunk interface. The VPLS virtual core interface represents all of the MPLS tunnels
from the router to the remote VPLS edge (VE) device.
Options
Subscriber Policy Configuration
Mode
330
broadcast
permit Specifies that the subscriber interface associated with the bridge group
or VPLS instance forwards broadcast packets
deny Specifies that the subscriber interface associated with the bridge group
or VPLS instance filters broadcast packets