Cablelength - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

cablelength

cablelength length
Syntax
no cablelength
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the length of the cable, which determines power requirements. The no
Description
version uses the default value, 0 feet.
Options
Controller Configuration
Mode
352
cablelength
length Cable length in the range 0–450 feet