Cache Entries - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

cache entries

cache entries entryNumber
Syntax
no cache entries
Command introduced in JUNOSe Release 8.1.0.
Release Information
Sets the number of entries in the aggregation cache. The no version sets the number
Description
of entries to the default value.
Options
Flow Cache Configuration
Mode
350
cache entries
entryNumber Number of entries in the aggregation cache in the range
1024 524288; default value is 4096