Bulkstats Interface-Type - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

bulkstats interface-type

[ no ] bulkstats interface-type interfaceType [ interfaceSpecifier ]*
Syntax
[ collector collectorIndex ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
mplsL2shim, mplsMajor, and mplsMinor keywords added in JUNOSe Release 8.2.0.
Configures the interface type on which you want to collect statistics. The no version
Description
deletes the interface type from bulkstats collection.
Options
Global Configuration
Mode
interfaceType One of the following interface types for which you can collect
statistics: ATM, ATM 1483, Ethernet, Frame Relay, Frame Relay subinterface,
Cisco HDLC, IP, MPLS minor, MPLS major, MPLS shim, PPP, VLAN subinterface
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line
collectorIndex—Number in the range 1–65535 that identifies the particular data
collector. Always specify this option if you defined more than one collector.
Chapter 3: B Commands
bulkstats interface-type
337