Bulkstats File-Format Endofline-Lf - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

bulkstats file-format endOfLine-LF

[ no ] bulkstats file-format endOfLine-LF
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Removes the carriage return (CR) and leaves only a line feed (LF) at the end of each
Description
line in the bulkstats file. The no version returns the end of line format to the default,
CR and LF.
Global Configuration
Mode
334
bulkstats file-format endOfLine-LF