Cbr - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

cbr

cbr pcr
Syntax
no cbr
Command introduced in JUNOSe Release 7.1.0.
Release Information
ATM VC Class Configuration mode added in JUNOSe Release 7.3.0.
In ATM VC Configuration mode, configures the constant bit rate (CBR) service category
Description
on an ATM PVC. You must specify the peak cell rate (PCR) value. The cbr command
is valid only for data PVCs; you cannot use this command for control (ILMI or
signaling) PVCs. The no version restores the default service category, unspecified bit
rate (UBR) without a PCR.
In ATM VC Class Configuration mode, configures the CBR service category as part
of a VC class definition that you assign to an ATM data PVC. The no version restores
the default service category, UBR without a PCR, in the VC class.
Options
ATM VC Configuration, ATM VC Class Configuration
Mode
pcr Peak cell rate, in Kbps, in the range 1–149760 (for OC3 ATM modules) or
1–599040 (for OC12 ATM modules)
Chapter 4: C Commands
353
cbr