Bulkstats Collector - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

bulkstats collector

bulkstats collector collectorIndex
Syntax
[ collect-mode { auto-xfer | on-file-full | manual-xfer } | description descrip |
interval intrvl | max-size maxSize | primary-receiver primRecvIndex |
secondary-receiver secRecvIndex | single-interval ]
no bulkstats collector collectorIndex [ collect-mode | description | interval | max-size
|primary-receiver | secondary-receiver | single-interval ]*
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates and configures a collector of bulk statistical data to collect MIB-2 ifTable MIB
Description
objects. You can configure up to six collectors. The no version restores the default
value for specified options; if no options are specified, the no version deletes the
collector.
Options
Global Configuration
Mode
collectorIndex Number in the range 1–65535 that identifies the particular data
collector
collect-mode Specifies one of the following collection modes:
auto-xfer Agent automatically transfers file when interval expires
on-file-full Agent automatically transfers file when it is full
manual-xfer Router or user-initiated transfers; default collection mode
descrip Descriptive information to insert into the bulkstats file
intrvl Time period in the range 300– 86400 seconds for which the collector
transfers data from the router to the receivers; default interval is 360 seconds
maxSize Maximum size of the file in the range 10240–20971520 bytes; default
file size is 2,621,440 bytes
primRecvIndex Number in the range 1–65535 that identifies the primary receiver
to which the router transfers the data; by default the primary receiver is cleared
secRecvIndex Number in the range 1–65535 that identifies the secondary
(backup) receiver to which the router transfers the data; by default the secondary
receiver is cleared
single-interval Specifies that the collector retrieves the bulk statistics data only
once; by default, the collector receives the data periodically
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Chapter 3: B Commands
333
bulkstats collector