Bulkstats Traps - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

bulkstats traps

bulkstats traps { nearly-full [ threshold ] | full }
Syntax
no bulkstats traps { nearly-full | full }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the bulkstats traps. The no version disables the trap.
Description
Options
Global Configuration
Mode
344
bulkstats traps
nearly-full Specifies a percentage less than 100 percent
threshold Percentage less than 100 percent; if not specified, defaults to
99 percent
full 100 percent