Ip Ssh Timeout - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip ssh timeout

Syntax
Release Information
Description
Options
Mode
952
ip ssh timeout timeout
no ip ssh timeout
Command introduced before JunosE Release 7.1.0.
Sets a timeout period in seconds. The SSH server terminates the connection if protocol
negotiation—including user authentication—is not complete within this timeout. The no
version restores the default value, 600 seconds.
timeout—Period in the range 10–600 seconds
Global Configuration
Copyright © 2010, Juniper Networks, Inc.